Floor Constructions

Warm-Flo Castellated Panel System

The castellated panel system is a fast and efficient system. With no need for UFH clips, the panels are fitted to the floor and the pipes are pushed in between the retention ridges, holding the pipe in place. This system is designed to be screeded straight over the top of.

Warm-Flo Tile Board

This system is another great system for a retro fit or where you are restricted on height. A 20mm board with a gypsum top fitted with a crack matt routed out for 16mm pipe. This allows you to tile directly on top of the board giving you a minimum build-up of board thickness plus tile.

Warm-Flo Plate System

System 1:
Kingspan insulation is laid in between the joists and the plate is then fitted over the top ensuring it is tight to the top of the joist. The 16mm UFH pipe is then laid into the plates and the structural flooring is then laid over the top.

System 2:
This system is fitted from underneath. The underside of the floor is exposed, and the plates are fitted in straight lines between the joists. The C shape on either side of the plates then secures the pipe in place. Insulation is then pushed in between the joists to help force the heat upwards.

Temporary Boiler Hire

Warm-Flo’s Force Dry are our temporary boilers which now give you the option to force dry your screeded floor to speed up your build and allow floor coverings to be installed earlier then expected. 240v single phase allows the Warm-Flo Force Dry to be used in domestic and commercial new builds.